UNIVERSAL TESTING MACHINE


Shanta Universal Testing machine is designed for testing Metals and other materials underTension , Compression, Bending, Transverse and Shear loads. Brinell Hardness Test on metals can also be conducted in smaller capacity UTM's.

All Shanta Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacturing. Every machine is than calibrated over each of its measuring range in accordance with the procedure laid down in BS 1610 and IS 1828. and comply with Grade “A” and Class 1.0 respectively.
 

SERIES SE-UTE

DIGITAL ELECTRO-HYDRAULIC UTM WITH MICROPROCESSOR BASED PANEL FOR MEASUREMENT.

SERIES SE-UTES

COMOMPUTER CONTROLLED ELECTRO HYDRAULIC SERVO UTM


 Shanta Universal Testing Machine are hydraulically operated.
Series SE-UTE is manually controlled with Microprocessor based Measuring Panel.
 Through RS232 it can be connected to PC for on-line graphic display and data storage,
     Test report generation and many other features as per customer requirement.
Series SE-UTES is Computer controlled with computerized measurement.
Electronic Clip-on Extensometer can be attached to above machines for measurement of
    Modulus of Elasticity (MOE) and Proof Stress.
Wide range of accessories comprising Standard and Special accessories are available.


SERIES SE-UTN
 

ELECTRO-HYDRAULIC UTM WITH DIAL DISPLAY AND AUTOGRAPHIC RECORDER
ELECTRO-HYDRAULIC UTM WITH DIAL DISPLAY
AND AUTOGRAPHIC RECORDER.


 Shanta Universal Testing Machine are
    hydraulically operated.

Series SE-UTN is manually controlled with
     Dial display.
     Dummy Pointer is provided to register peak load.
     Autographic recorder is attached to machine that
     gives Load-Displacement curve on a
     continuous chart paper.

Mechanical Clip-on Extensometer can be attached
    to above machines for measurement of Modulus
    of Elasticity (MOE) and Proof Stress with the help
    of manually drawn Load-Displacement curve.

Wide range of accessories comprising Standard
     and Special accessories are available.
 Gauge Length (In steps): 30-120mm
Gauge Length: 25mm & 50mm
 Measuring Range: 0-3mm Measuring Range: 0-2mm
Specimen Thickness/Dia.: 1 to 20mm Specimen Thickness/Dia. 0.5 to 30mm
Resolution: 0.01mm Resolution: 0.001mm

Melt Flow Tester | UTM Single Column Testing Machine | Utm Twin Column Testing Machine |
UTM Thydraulic Testing Machine  | Izod & Charpy Impact Tester | Oxygen Index Tester |
Notch Cutter ( Motorised & Manual )
| Dart Impact Tester | Smoke Density Tester | Carbon Black Content |
Environmental Stress Cracking Tester  | VICAT / HDT Tester | Co-efficient of Friction Tester | Dart Impact Tester |
Equipments for cable testing | Torsion Tester for Insulators | Halogen Acid Tester | Sample Cutting Press |
Dumbbell Cutters | Drop Tester for Containers, Crates, Tanks etc. | Thermal Stability |
Kranti Briquetter | Melting Point


Home
| Profile | Clients  | Feedback



Address :
10, Anusaya, Opp. Mangala High School, Kopari, Thane (E) - 400603, Maharashtra, INDIA
Factory : Pomal Industrial Area, Next to Wellman Company, Near Bayer India,
Dhokali - Kolshet Road, Thane (W) - 400607,
Maharashtra, INDIA * Tel. : 022 - 25893581 / 32503771 * Email : response@shantaengineering.com

Designed & Hosted by : MID Promoted by : GID